Site perimeter and gates checklist
Fences, gates, and signs that keep the public out. Get it in Reldro to edit it and use it on a phone, even without signal.
- 7 items
- 1 critical
- Every day
- Editable in Reldro
When to use this checklist
Use it at the start of each shift, and after storms, deliveries, or any change to the fence line.
- How often
- Every day
- Critical items
- 1 of the 7 items are marked critical. If a critical item fails, stop and fix it, or keep people away, before the work goes ahead.
Tips for using it
- Walk the full fence and check each gate.
- Repair gaps the same day, or guard them until they're fixed.
- Write down what failed and who will fix it by when. A failed item with no owner often comes back.
- Edit the list to match your site and your procedures before you use it with a crew.
Common questions
What's on a site perimeter and gates checklist?
It has 7 checks: Fence panels are upright and joined with no gaps; Gates close and lock; Warning signs are in place and readable; Ladders and climbing aids are removed or secured; Hoarding and covered walkways are intact; Entry and exit points are clear of vehicles; Site contact details are posted at each gate. 1 of them is critical.
How often should you do a site perimeter and gates checklist?
Every day. Use it at the start of each shift, and after storms, deliveries, or any change to the fence line.
What do you do when a check fails?
Write down what failed, who will fix it, and by when. If a critical check fails, stop and fix it, or keep people away from the hazard, before the work goes ahead. In Reldro, a failed check can become a corrective action with an owner and a due date.
Can you use this site perimeter and gates checklist for free?
You can read it here for free. To use it, get it in Reldro. It arrives ready for you to edit to fit your site and procedures, your crew can complete it on a phone even without signal, and Reldro keeps each completed checklist with the site, the date, and who did it.
Does this checklist make a site safe or compliant?
No. It's a starting point for your own inspection. Adapt it to your procedures and the rules where you work. Reldro doesn't certify that a site or job is safe or compliant.
Last updated .
Use this checklist in Reldro
- It arrives ready to edit, and your crew uses it on their phone, even without signal.
- Failed items become corrective actions with an owner and a due date.
- Every completed one is kept with the site, the date and who did it.
Goes with
JHA: setting up the site and fencingSet out the site perimeter, install fencing and gates, and put up signs before work starts.4 steps
JHA: protecting pedestrians and the publicKeep passers-by, neighbors, and visitors safe from the work.4 steps- Toolbox talk: protecting the publicPeople outside the fence are our responsibility, too.About 5 minutes
More daily and weekly walks checklists
- Start-of-shift site checklistA five-minute look around before the crew starts.6 items · Every day
End-of-shift walk and lock-up checklistLeave the site safe overnight.6 items · Every day- Housekeeping and exits walk checklistTrip hazards, blocked exits and waste.6 items · Every week
- Weekly site safety walk checklistA full walk of the site once a week.8 items · Every week