Demolition and strip-out pre-start checklist

It has 6 checks: Hazardous material survey was reviewed; Services are isolated and marked; Load-bearing elements are identified and supported; Dust and noise controls are in place; Exits and debris routes are clear; Exclusion zones are set. 2 of them are critical.

When the work happens. Use it before demolition or strip-out starts, and when the scope changes.

Write down what failed, who will fix it, and by when. If a critical check fails, stop and fix it, or keep people away from the hazard, before the work goes ahead. In Reldro, a failed check can become a corrective action with an owner and a due date.

You can read it here for free. To use it, get it in Reldro. It arrives ready for you to edit to fit your site and procedures, your crew can complete it on a phone even without signal, and Reldro keeps each completed checklist with the site, the date, and who did it.

No. It's a starting point for your own inspection. Adapt it to your procedures and the rules where you work. Reldro doesn't certify that a site or job is safe or compliant.